Mechanical Properties
Abrasion Resistance Taber CS17 Wheels/1 Kg load 122mg loss/1000 cycles 0.08cc loss/1000 cycles
Adhesion Tensile Shear to ASTM D1002 on abrasive blasted mild steel with 75 micron profile , 187kg/cm² (2650psi)
Compressive strength Tested to ASTM D 695, 35kg/cm² (10,450psi)
Corrosion Resistance Tested to ASTM B117, Minimum 5000 hours
Flexural Strength Tested to ASTM D790, 570kg/cm² (8100psi)
Hardness Rockwell R to ASTM ASTM D785, 85
Heat Distortion Tested to ASTM D648 at 264psi fibre stress. 20°C Cure – 46°C, 100°C Cure – 82°C
Heat Resistance Suitable for use in immersed conditions at temperatures up to 70°C. Resistant to dry heat up to 200°C dependant on load.
Chemical Resistance The product resists attack by a wide variety of inorganic acids, alkalies, salts and organic media.
Features & Benefits
Solvent free epoxy technology
Apply in 2 coats at 250-350 microns per coat
Suitable for all metallic surfaces
No shrinkage
High gloss finish for flow improvement
High compressive strength once cured
High abrasion & wear resistance
Ideal for low particulate fluid environments
Applications
Suitable for the coating of equipment such as pump cases and impellers, valves, pipes, propellers, rudders, jet tubes, kort nozzles, etc.
