Adhesion Tensile Shear to ASTM D1002 on abrasive blasted mild steel with 75 micron profile. 185kg/cm² 2630psi
Compressive strength Tested to ASTM D 695. 1075kg/ cm² 15,300psi
Corrosion Resistance Tested to ASTM B117. Minimum 5000 hours
Flexural Strength Tested to ASTM D790. 703kg/cm² 10,000psi
Hardness Rockwell R to ASTM D785. 100
Heat Distortion Tested to ASTM D648 at 264psi fibre stress. 20°C Cure @ 58°C & 100°C Cure @ 98°C
Heat Resistance Suitable for long term water immersion at temperatures up to 70°C and intermittent contact with pressurised steam up to 120°. Resistant to dry heat in excess of 200°C dependant on load.
Chemical Resistance The product resists attack by a wide variety of inorganic acids, alkalies, salts and organic media.
Suitable for emergency repairs or part of planned maintenance to equipment such as worn or damaged pump shafts, cracked pump or valve casings, scored hydraulic rams, worn bearing housings, damaged flanges, leaking tank seams, worn keyways and cracked engine blocks.
The material can also be used as a gap filling adhesive.