Chemical Resistance
The product resists attack by a wide variety of inorganic acids, alkalies, salts and organic media including:
Acetic Acid 10% @ Max 50˚C
Ammonia Hydroxide 30% @ Max 80˚C
Benzene 100% @ Max 60˚C
Butanol 100% @ Max 50˚C
Chromic Acid 10% @ Max 75˚C
Ethanol 100% @ Max 60˚C
Hydrocarbons with steam @ Max 90˚C
Hydrobromic Acid 40% @ Max 50˚C
Hydrochloric Acid 36% @ Max 75˚C
Nitric Acid 10% @ Max 50˚C
Phosphoric Acid 75% @ Max 90˚C
Steam out @ Max 200˚C
Sulphuric Acid 98% @ Max 75˚C
Toluene 100% @ Max 60˚C
Xylene 100% @ Max 60˚C
Mechanical Properties
Abrasion Resistance Taber CS17 Wheels/1 Kg load 64mg loss/1000 cycles 0.08cc loss/1000 cycles
Adhesion Tensile Shear to ASTM D1002 on abrasive blasted mild steel with 75 micron profile 196kg/ cm² (2790psi)
Compressive strength Tested to ASTM D 695 790kg/cm² (11235psi)
Corrosion Resistance Tested to ASTM B117 Minimum 5000 hours
Flexural Strength Tested to ASTM D790 820kg/cm² (11600psi)
Heat Distortion Tested to ASTM D648 at 264psi fibre stress. 20°C Cure 60°C 100°C Cure 98°C 150°C Cure 112°C
Hardness Shore D to ASTM D2240 20°C 86 100°C 85 150°C 72
Heat Resistance Suitable for use in immersed conditions at temperatures up to 90°C. Resistant to dry heat up to 200°C dependent on load.
