Chemical Resistance
The product resists attack by a wide variety of inorganic acids, alkalies, salts and organic media including:
Acetic Acid 10% @ Max 50˚C
Ammonia Hydroxide 30% @ Max 80˚C
Benzene 100% @ Max 60˚C
Butanol 100% @ Max 50˚C
Chromic Acid 10% @ Max 75˚C
De-ionised Water @ Max 110˚C
Ethanol 100% @ Max 60˚C
Hydrocarbons with steam @ Max 110˚C
Hydrobromic Acid 40% @ Max 50˚C
Hydrochloric Acid 36% @ Max 75˚C
Nitric Acid 10% @ Max 50˚C
Phosphoric Acid 75% @ Max 90˚C
Steam out @ Max 220˚C
Sulphuric Acid 98% @ Max 75˚C
Toluene 100% @ Max 60˚C
Xylene 100% @ Max 60˚C
Mechanical Properties
Abrasion Resistance Taber CS17 Wheels/1 Kg load 138mg loss/1000 cycles 0.15cc loss/1000 cycles
Adhesion Tensile Shear to ASTM D1002 on abrasive blasted mild steel with 75 micron profile 188kg/ cm² (2650psi)
Compressive strength Tested to ASTM D 695 592kg/cm² (8400psi)
Corrosion Resistance Tested to ASTM B117 Minimum 5000 hours
Flexural Strength Tested to ASTM D790 480kg/cm² (6800psi)
Heat Distortion Tested to ASTM D648 at 264psi fibre stress. 20°C Cure 62°C 100°C Cure 98°C 150°C Cure 112°C
Hardness Shore D to ASTM D2240 20°C 86 100°C 84 150°C 72
Heat Resistance Suitable for use in immersed conditions at temperatures up to 110°C. Resistant to dry heat up to 170°C dependent on load
