Mechanical Properties
Abrasion Resistance Taber CS17 Wheels/1 Kg load 20mm³ loss/1000 cycles
Adhesion Tensile Shear to ASTM D1002 on abrasive blasted mild steel with 75 micron profile 206kg/ cm² (2920psi)
Pull off Adhesion to ASTM D4541 on abrasive blasted mild steel with 75 micron profile 244 kg/ cm² (3480 psi)
Compressive strength Tested to ASTM D695 1075kg/cm² (15300psi)
Corrosion Resistance Tested to ASTM B117 Minimum 5000 hours
Flexural Strength Tested to ASTM D790 703kg/cm² (10,000psi)
Hardness Rockwell R to ASTM D785 100
Heat Distortion Tested to ASTM D648 at 264psi fibre stress. 20°C Cure 58°C 100°C Cure 98°C
Heat Resistance Suitable for use in immersed conditions at temperatures up to 60°C. Resistant to dry heat up to 200°C dependent on load.
Chemical Resistance The product resists attack by a wide variety of inorganic acids, alkalies, salts and organic media.
Features & Benefits
Solvent free
Manufactured using the latest epoxy technology
High build capability (up to 1″ without slumping)
Suitable for all metallic surfaces
No shrinkage
Excellent chemical resistance
Superior adhesion to metallic surfaces
High compressive strength once cured
Superior abrasion & wear resistance
USDA compliant for incidental food contact.
Overcoat with 202 Ceramic Repair Fluid or 203 Super Flow
Applications
worn impellers, damaged valves, separator housings , damaged pump casings, eroded pipe work, propeller, bow thrusters, rudders, corroded water boxes end plates and tube sheets.
